Body, Sheet Metal and Painting
Installation Procedure:
1.
Connect the hood release cable to the hood cable latch.
FE12-0113b
FC12-0111b
2.
Install and tighten the hood latch to front end module
retaining bolts.
Note
Refer to "Fastener Notices" in the "Warnings and
Notices".
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
3.
Install the radiator grille.
4.
Remove the hood brace and close the hood.
FE12-0114b
12.2.3.3 Hood and Hinge Replacement
Removal Procedure:
Note
Install protective covers on the front fender and the
windshield to avoid damage to the paint, glass and
panels.
Body Front End
EC718/EC718RV EC715/EC715RV 10/2009
12-9