Table of Contents
Advertisement
12-22
Body Rear End
EC718/EC718RV EC715/EC715RV 10/2009
12.3.3.5
Assembly Replacement (Sedan)
Removal Procedure:
1.
Remove the rear compartment lid inner panel trim. Refer
to
12.9.1.14 Rear Compartment Lid Inner Trim Panel
Replacement.
2.
Disconnect the emergency exit open handle release cable
(1) from the rear compartment lid latch.
3.
Remove the emergency exit open handle retaining screws
(2).
4.
Remove the emergency exit open handle assembly.
FE12-0134b
Installation Procedure:
1.
Install the emergency exit open handle and tighten the
retaining screws (2).
Torque: 4 Nm (Metric) 2.96 lb-ft (US English)
2.
Connect the emergency exit open handle release cable
(1) to the rear compartment lid latch.
3.
Install the rear compartment lid inner panel trim.
FE12-0135b
Body, Sheet Metal and Painting
Emergency
Exit
Open
Handle
Advertisement
Chapters
Table of Contents
