11-486
Reverse Radar
EC718/EC718RV EC715/EC715RV 10/2009
1
2
1
FE11-1212c
FE11-1213c
Installation Procedure:
1.
Tighten the reverse radar module retaining bolts (1).
Torque: 8-11 Nm (Metric) 6-8 lb-ft (US English)
2.
Connect the reverse radar module harness connector (2).
3.
Install the hatchback left panel.
4.
Connect the battery negative cable.
11.14.7.2 Reverse Radar Sensor Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
Disconnection.
2.
Remove the rear bumper. Refer to
Replacement
(Sedan).
Body Electric
12.4.3.3 Rear Bumper