11-122
Lighting System
EC718/EC718RV EC715/EC715RV 10/2009
5.
Remove the lamp bulb (2).
Installation Procedure:
1.
Install the lamp bulb (1).
2.
Connect the electrical wiring harness connector (2).
3.
Install the rear dome lamp.
Note
"Fastener Notice" in "Warnings and Notices".
Torque: 4 Nm (Metric) 3 lb-ft (US English)
4.
Press the door controlled lamp cover into place.
5.
Connect the battery negative cable.
11.4.8.5 Rear Compartment Lamp (Hatchback
Lamp) Replacement
Removal Procedure
1.
Remove the rear compartment lamp cover.
Note
Hatchback lamp cover for hatchback.
2.
Remove the rear compartment lamp (Hatchback Lamp)
bulb.
FE11-0231b
Installation Procedure:
1.
Install the rear compartment lamp (Hatchback Lamp)
bulb.
2.
Install the rear compartment lamp cover (hatchback lamp
cover).
FE11-0232b
Body Electric