Table of Contents
Advertisement
Body, Sheet Metal and Painting
1
12.5.2 Removal and Installation
12.5.2.1 Front Door Hinge Replacement
Removal Procedure:
1.
Remove the front fender. Refer to
Replacement.
2.
Remove the front door wiring harness dust cover and
disconnect harness connector (1).
3.
Remove the front door check link. Refer to
Door Check Link
4.
Use a cleaning cloth to clean the door hinge surface and
use an oil pen or other marking tools to mark the door
hinge position on the front door surface.
5.
Remove the front door hinge to the front door retaining
FE12-0168b
bolts.
6.
Remove the front door.
7.
Use a cleaning cloth to clean the door hinge surface and
use an oil pen or other marking tools to mark the door
hinge position on the body surface.
8.
Remove the front door hinge to the body retaining bolts.
9.
Remove the front door hinges.
FE12-0169b
Installation Procedure:
1.
Install the front door hinge to the front door retaining bolts
and tighten to the specified torque after tuning.
Torque: 25 Nm (Metric) 18.5 lb-ft (US English)
Note
Refer to "Fastener Notices" in "Warnings and
Notices".
FE12-0170b
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
Doors
12-39
12.2.3.4 Front Fender
12.5.2.2 Front
Advertisement
Chapters
Table of Contents
