Hatchback Release Handle Replacement (Hatchback) - Geely EC718 2009 Workshop Manual

Body, Sheet Metal and Painting
12.3.3.6 Hatchback
Replacement (Hatchback)
Removal Procedure:
1. Remove hatchback
12.9.1.15 Hatchback Inner Trim Panel Replacement
(Hatchback).
2. Remove hatchback release handle retaining nuts (1).
3. Disconnect the hatchback release cable (2) from the
hatchback latch.
4. Remove the hatchback release handle.
Installation Procedure:
1. Install the hatchback release handle and tighten the
retaining nuts (1).
2. Connect the hatchback release cable (2) to the hatchback
latch.
3. Install hatchback inner trim panel.
EC718/EC718RV EC715/EC715RV 10/2009
Body Rear End
Release Handle
inner trim panel. Refer
12-23
to