Body Electric
6.
Connect the connector.
7.
Install the front bumper.
8.
Connect the battery negative cable.
Note
After installing the headlamp, adjust the light beam.
The front park lamps, front turn signal lamps
replacements are the same as the headlamp.
FE11-0265b
11.4.8.12 Tail Lamp Replacement (Sedan)
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2.
Remove the rear compartment side trim. Refer to
12.9.1.9 Rear Compartment Trim Panel
FE11-0266b
Lighting System
Disconnection.
EC718/EC718RV EC715/EC715RV 10/2009
11-135
Replacement.