11-314
Sunroof
No
Check the circuit between the sunroof switch harness connector RF06 and body ground.
Step 5
No
Repair the circuit between the sunroof switch harness connector RF06 and body ground.
Step 6
No
Replace the sunroof switch.
Step 7
Next
Step 8
System normal.
11.8.7.7 Sunroof Anti-trap Function Inoperative
Schematic:
Refer to
11.8.7.4 Sunroof
Inoperative.
Diagnostic Steps:
Step 1
Carry out the sunroof initialization.
No
Step 2
Replace the sunroof switch assembly.
EC718/EC718RV EC715/EC715RV 10/2009
(a)
Remove the sunroof switch. Refer to
Assembly
Replacement.
(b)
Measure resistance between the sunroof switch harness
connector RF06 terminal No.4 and body ground with a
multimeter.
Standard Resistance: Less than 1 Ω
Is the resistance specified value?
Go to step 7
Yes
Confirm the repair completed.
System normal
Yes
(a)
Install a new sunroof switch.. Refer to
Switch Assembly
Replacement.
Confirm the repair completed.
Is the sunroof working properly?
System normal
Yes
(a)
Install a new sunroof switch. Refer to
Assembly
Replacement.
Is the sunroof working properly?
Body Electric
11.8.8.3 Sunroof Switch
11.8.8.3 Sunroof
11.8.8.3 Sunroof Switch