Wiper Inoperative At High Speed - Geely EC718 2009 Workshop Manual

Body Electric
Front Wiper Motor Harness Connector CA14
Wiper Switch Harness Connector IP19
Next
Step 10 System normal.

11.6.7.4 Wiper Inoperative At High Speed

Schematic:
Refer to 11.6.7.3 Wiper Inoperative At All
Diagnostic Steps:
Step 1 Check the wiper motor harness connector terminal No.4 voltage.
Front Wiper Motor Harness Connector CA14
(a)
(b)
Confirm the repair completed.
FE11-5507b
Speed.
(a)
(b)
(c)
Is the voltage specified value?
FE11-5508b
Wipers / Washers System
Check and repair the open circuit between the windshield
wiper switch and wiper motor.
Confirm the circuit between the windshield wiper switch and
wiper motor is working properly.
Turn on the ignition switch.
Turn the wiper switch to "HI" (high speed) position.
Measure the wiper motor wiring harness connector terminal
No.4 voltage with a multimeter.
Standard Voltage: 11-14 V
Go to step 3
No
EC718/EC718RV EC715/EC715RV 10/2009
11-229