Wiper And Cleaner; Wiper And Cleaner System; Malfunction Phenomena Table; Inspect The Car - Geely FC Workshop Manual

Wiper and cleaner

Wiper and cleaner system

Malfunction phenomena table

The underside table can help you to eliminating malfunction in wiring. It sorts as possibilities of malfunction's
reasons.
Malfunction
Wiper and cleaner do not work.
Wiper does not work on LO, HI or MIST.
Wiper does not work on INT
Washer generator does not work
When cleaner switch ON, wiper does not
work.
Wiper cleaner can not spout
Right assembled switch on HI, wiper
blade will touch the bodywork.
When right combination switches are OFF, washer will
not return to original position or stop position is incorrect.
*1:inspect set position of wiper arm and wiper blade.

Inspect the car

Inspect the function of cleaner generator
(1) Add some rinsing to wiper water tank, then disassemble
cleaner generator joint.
(2) Connect battery wire with cleaner generator joint terminal2,
negative wire with terminal1,then inspect whether cleaner
generator works.
Notes: Be quick(in 20 seconds) to do this test to pre-
vent cleaner generator coil from burning.
If its function does not in accord with regulations, replace
cleaner generator.
Wiper and cleaner--Wiper and cleaner system
Component names
1. ignition switch
2. ignition relay
3. (wiper) fuse (central power distribution box)
4. right assembled switch
5. wiring harness
1. right assembled switch
2. wiper generator
3. wiring harness
1. right assembled switch
2. wiper generator
3. wiring harness
1. (washer) fuse (central power distribution box)
2. wiper switch
3. wiper generator
4. wiring harness
1. right assembled switch
2. washer generator
3. wiring harness
1. cleaner hose and nozzle
1. right assembled switch *1
2. wiring harness
Reference pages
-
-
-
302
302
303
302
303
-
-
-
-
302
303
-
-
302
-
299