Commissioning The Device; General Information On Commissioning - Siemens SIMATIC IPC477D Operating Instructions Manual

Commissioning the device

4.1

General information on commissioning

Danger of burns
The surface of the device can reach temperatures of over 70 °C. Any unprotected contact
may cause burns.
Avoid direct contact with the device while it is in operation. Touch the device only with
appropriate protective gloves.
Note
Windows Embedded Standard 7 - Note the EWF and FBWF information
Two configurable write filters (Enhanced Write Filter and File Based Write Filter) are
provided with Windows Embedded Standard. Read the EWF/FBWF information if you
activate and use them, otherwise you may experience data loss.
• Enhanced Write Filter (Page 88)
• File Based Write Filter (FBWF) (Page 90)
Note
Configuring memory cards in the device
Memory cards used in a device need to be configured on that device. Memory cards
configured on other devices will not boot as the drive parameters will be different.
Requirement
● The terminal compartment cover of the PRO device is open.
● The device is connected to the power supply.
● The protective conductor is connected.
● The connection cables are plugged in correctly.
● The following hardware is available for initial commissioning:
– One USB keyboard
– One USB mouse
Note
Switching on the PRO device
An external on/off switch is recommended to avoid having to continually open the terminal
compartment cover.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
CAUTION
4
73