General Information - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Repairs
Only qualified technical personnel are permitted to repair the device.
Unauthorized opening of and improper repairs to the device may result in substantial
damage to equipment or risk of personal injury to the user.
2.2

General Information

Overview
CAUTION
The device must only be operated in closed rooms. Failure to comply nullifies the warranty
Operate the device only in accordance with the ambient conditions specified in the technical
specifications. Protect the device against dust, moisture and heat. Do not place the device in
direct sunlight.
Transportation
Unpack the device at the its installation location. Transport the device only in the original
packaging. Do not transport the device when it is mounted.
NOTICE
Adhere to these stipulations each time the device is transported, otherwise the guarantee is
void.
CAUTION
Condensation
When transporting the device at low temperatures, ensure that no moisture gets on or into
the device. This also applies if the device is subjected to extreme changes in temperature.
Commissioning
Allow the device to slowly adjust to room temperature before commissioning the device.
However, do not expose the device to direct heat radiation. If moisture condensation
occurs, wait at least 12 hours before you switch on the device.
Vibration
Optical drives are sensitive to vibration. Inadmissible vibration during operation may result
in loss of data or damage to the drive or data medium.
Before transporting the device, wait at least 20 seconds to allow the drive to stop
completely.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
WARNING
Safety
2.2 General Information
13