08/Mask, Fender, Decal; Removing The Side Covers; Installing The Side Covers; Removing The Inside Cover - KTM 1190 RC8 EU 2008 Repair Manual

08/MASK, FENDER, DECAL

08/MASK, FENDER, DECAL 12

Removing the side covers

12.1

Installing the side covers

12.2

Removing the inside cover

12.3
–
Remove screws
–
Remove side covers
Info
Watch out for the projections on the inside cover.
200492-10
–
Position side covers
Info
Watch out for the projections on the inside cover.
–
Mount and tighten screws
Guideline
Remaining chassis screws
200492-11
–
Switch off all power-consuming components and switch off the engine.
–
Remove the seat. (
–
Disconnect the negative (minus) cable of the battery.
–
Remove the side covers. (
–
Remove expanding rivet
200493-10
–
Disconnect the plug-in connectors from generator
tor .

–
Unscrew ground wire
–
Remove screw
200494-10
–
Remove screws
–
Take off the left inside cover.
200537-10
on both sides.

on both sides.

on both sides.

on both sides.

M5
p. 32)
p. 36)
.

from the frame.

.

.

5 Nm (3.7 lbf ft)
and ignition pulse genera-

36