Removing The Fork Protector; Installing The Fork Protector; Removing The Fork Legs - KTM F8475S0 2019 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
52

Removing the fork protector

S01208-10

Installing the fork protector

S01208-11

Removing the fork legs

K01014-10
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the left fork protector.
–
3
Remove screws and take off the right fork protector.
–
Position the fork protection on the left fork leg. Mount and
1
tighten screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and brake line to hang tension-free to
the side.
Info
Do not pull the hand brake lever if the front wheel has
been removed.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 50)
( p. 94)