Cleaning The Dust Boots Of The Fork Legs; Removing The Fork Protector - KTM 350 EXC-F 2024 Owner's Manual

12.4

Cleaning the dust boots of the fork legs

12.5

Removing the fork protector

Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the fork protector. (
Main work
–
Push dust boots
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
K00070-10
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
fork protector.
–
Remove screws
fork protector.
V00332-10
SERVICE WORK ON THE CHASSIS 12
p. 61)
1
of both fork legs downward.
p. 161)
p. 62)
1
and take off the clamp.
2
on the left fork leg and take off the left
3
on the right fork leg and take off the right
p. 60)
p. 60)
61