Removing The Fork Protector; Installing The Fork Protector - KTM 350 SX-F 2023 Owner's Manual

11.5

Removing the fork protector

11.6

Installing the fork protector

Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
(All standard models)
–
Remove screws
–
Remove screws
–
Remove screws
S05329-10
(350 XC‑F US Factory Edition)
–
Remove the front wheel.
–
Remove screws
–
Remove screws
–
Remove screws
S05599-10
(All standard models)
–
Position the fork protector on left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws
–
Position the fork protector on the right fork leg. Mount and
S05329-11
tighten screws
Guideline
Remaining screws,
chassis
SERVICE WORK ON THE CHASSIS 11
p. 153)
p. 55)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
( p. 103)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
1
.
M6
.
3
.
M6
p. 53)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
55