Detailed Setting In Stamp/Watermark - Konica Minolta bizhub PRO C5501 User Manual

11
11.17.8

Detailed setting in stamp/watermark

Making fine adjustment on printing position
Use this function to make fine adjustment on printing position of Built-in Stamp, Set Numbering, Page No.,
and Date/Time. The adjustment range is 0 to 50 mm, in lengthwise direction ([Top] or [Bottom]) and in
widthwise direction ([Right] or [left]).
1
Touch the desired direction key to highlight it, then use [,] and [+], or touch panel keypad to enter the
desired amount.
2
Touch [OK] to complete the setting and return to the previous screen.
Setting start number in set numbering
Touching [Start Number] on the Set Numbering Screen will display the following screen to allow you to
specify the start number.
1
Use [,] and [+], or touch panel keypad to enter the desired start number. Up to four digits can be
specified.
2
Touch [OK] to complete the setting and return to the previous screen.
11-64
Application functions
bizhub PRO C5501