Detailed Setting In Stamp/Watermark; Making Fine Adjustment On Printing Position; Setting Start Number In Set Numbering - Konica Minolta bizhub pro C6501 User Manual

Application Functions

11.17.8Detailed Setting in Stamp/Watermark

Making fine adjustment on printing position

Use this function to make fine adjustment on printing position of Built-in
Stamp, Set Numbering, Page No., and Date/Time. The adjustment range is
0 to 50 mm, in lengthwise direction ([Top] or [Bottom]) and in widthwise di-
rection ([Right] or [left]).
Procedure
1
Touch the desired direction key to highlight it, then use [,] and [+], or
touch panel keypad to enter the desired amount.
2
Touch [OK] to complete the setting and return to the previous screen.

Setting start number in Set Numbering

Touching [Start Number] on the Set Numbering Screen will display the fol-
lowing screen to allow you to specify the start number.
bizhub PRO C6501
11
11-83