Placing A Stamp On The Transmitted Document - Konica Minolta Di3510f User Manual

6

Placing a stamp on the transmitted document

It is possible to place a transmission stamp on documents.
Tip
An optional TX Marker STAMP UNIT 2 is necessary.
Transmission stamp cannot be set at the same time as double-sided transmis-
sion.
Replace the stamp when the stamp becomes faint (See p. 9-5).
There is no stamping when in copy mode.
1
Set an original in the paper feed tray.
2
Press the [Fax/Scan] key.
3
Touch [FAX Menu].
4
Touch [Set 2], then touch [TX
Marker].
6-24
6.6 Various Transmission Settings
Di2510f/Di3010f/Di3510f