Figure 31: Accessory Kit Items - Allied Telesis x530 Series Installation Manual

Figure 31 lists the items that are included in the accessory kit for the x530-
28GPXm, x530-28GTXm, x530-28GSX, x530-52GPXm, and x530-
52GTXm. Contact your Allied Telesis sales representative for assistance if
any item is missing or damaged.
1570
1947
2047
3374
3375
x530 Series Installation Guide for Virtual Chassis Stacking
One 2m (6.6 ft) local management
cable with RJ-45 (8P8C) and DB-9
(D-sub 9-pin) connectors.
1417
Two regional AC power cords.
1570
Two or four wall/equipment rack
brackets depending on the model.
1947
Eight or sixteen screws for attaching
the wall/equipment rack brackets
depending on the model.
Length: 6.0mm (0.2 in.)
2047
Diameter: 4.0mm (0.2 in.)
Two or four anchors for concrete
walls depending on the model.
Length: 29.6mm (1.2 in.)
Diameter: 6.0mm (0.2 in.)
3374
Two or four screws for wood or concrete
walls depending on the model.
Length: 32mm (1.3 in.)
Diameter: 4mm (0.2 in.)
3375
Two power cord retaining clips
Seven rubber feet
Figure 31. Accessory Kit Items
99