Figure 13: Accessory Kit Items - Allied Telesis AlliedWare Plus x530 Series Installation Manual

Stand-alone stackable gigabit layer 3+ ethernet switches
Hide thumbs Also See for AlliedWare Plus x530 Series:
Table of Contents

Advertisement

Chapter 2: Beginning the Installation
54
Figure 13 lists the items that are included in the accessory kit. Contact
your Allied Telesis sales representative for assistance if any item is
missing or damaged.
1570
1947
3374
3375
One 2m (6.6 ft) local management
cable with RJ-45 (8P8C) and DB-9
(D-sub 9-pin) connectors.
1417
Two regional AC power cords.
1570
Two or four wall/equipment rack
brackets depending on the model.
Eight or sixteen screws for attaching
the wall/equipment rack brackets
depending on the model.
Length: 6.0mm (0.2 in.)
Diameter: 4.0mm (0.2 in.)
2047
Two or four anchors for concrete
walls depending on the model.
Length: 29.6mm (1.2 in.)
Diameter: 6.0mm (0.2 in.)
Two or four screws for wood or concrete
walls depending on the model.
Length: 32mm (1.3 in.)
Diameter: 4mm (0.2 in.)
Two power cord retaining clips
Four rubber bumper feet
Figure 13. Accessory Kit Items

Advertisement

Table of Contents
loading

Table of Contents