Table of Contents
Advertisement
Figure 40. Removing a drive blank
Next steps
1.
Replace the drive
blank.
Installing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
Steps
Insert the drive blank into the drive slot until the release button clicks into place.
Figure 41. Installing a drive blank
Next steps
1. If removed,
install the front
Removing the drive carrier
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
3. Using the management software, prepare the drive for removal.
If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are off, the
drive is ready for removal. For more information, see the documentation for the storage controller.
70
Installing and removing system components
Safety instructions
bezel.
bezel.
Safety instructions
bezel.
on page 46.
on page 46.
Advertisement
Table of Contents
