Installation; Installation Overview - Extron electronics IN1804 Series User Manual

Installation

This section contains information on how to connect cables to the IN1804 models. Topics in
this section include:
•
•
•

Installation Overview

1.
2.
3.
4.
5.
6.
7.
8.
Installation Overview
Rear Panel Connections
Connection Details
Turn off or disconnect all related equipment. Ensure that video sources and output
displays are all turned off and disconnected from the power source.
Mount the scaler (see Mounting
Connect input sources (see
Connect output devices (see
Connect desired control devices (see
(Optional) Connect contact closure and tally indicator devices and any needed Show
Me cables (see Wiring the Contact/Tally Connectors
Connect a power source to the scaler (see
Configure the scaler using by any of the following methods:
Front panel menus (see
•
PCS (see Configuration Software
•
software, and see the IN1804 Series PCS Help File to configure the system)
SIS commands (see SIS Configuration and
•
on page 98).
Rear Panel Connections
Rear Panel Connections).
Rear Panel Connections).
AC power connector
Operation
beginning on page 22)
beginning on page 80 to download the
Control, beginning on page 48)
IN1804 Scaling Presentation Switcher • Installation
on page 11).
on page 20.
on page 12).
10