Extron electronics IN1804 Series User Manual page 73

Command
Output Configuration (continued)
Screen Saver
Set mode
View mode
Set screen saver duration
before output sync timeout
View screen saver duration
before output sync timeout
View screen saver status
OSD Menu Duration
Set OSD duration
View OSD duration
KEY:
X2*
= Output sync or OSD menu timeout
X4)
= Screen saver mode
X6#
= Screen saver status
Logos
Logo Assignment
Select image file
NOTES:
• The filename must consist of a full path name if the file is not in the /Graphics directory.
• The file name must include the extension (.png, .bmp, .jpg, .gif, .tif, and so on).
• If the file is not in the /Graphics directory, include a / before the filename to indicate that it is in the root directory.
Example: /Logo123.bmp.
View selected logo file
KEY:
X1$
= Logo name (text label)
X4#
= User logo number
ASCII Command Response
(Host to Scaler) (Scaler to Host)
E X4) }
M1* SSAV SsavM1*
E } X4)]
M1 SSAV
E X2* }
T1* SSAV Ssav T1*
E } X2*]
T1SSAV
E } X6#]
S1SSAV
Verbose modes 2 and 3:
Ssav S 1*
EX2* }
MDUR Mdur
E } X2*]
MDUR
Number of seconds before output sync or the OSD menu times out.
1 through 500 seconds, in 1-second increments
0 =
60 = Default for the MDUR command.
501 = Output sync never times out (default for SSAV command).
1 = Black screen (default)
2 = Blue screen with OSD text
3 = User image on black screen
0 = Active input detected, timer not running
1 = No active input, timer running, output sync still active
2 = No active input, timer expired, output sync disabled
E X4# }
A ,filename LOGO
LogoA
E X4# }
A LOGO filename
Up to 32 characters, excluding , (comma) ,*, and
1 through 16. The response is three digits padded with leading zeros.
101 = No signal, screen saver user logo or image is displayed.
201 = User HDCP logo displayed
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
Additional Description
X4)] Set the screen saver mode for the
output to
View the screen saver mode
output. Default = 1 (black).
X2*]
Set the screen saver timeout duration to
X2*
seconds. Default = 501 (never).
View screen saver timeout duration
View screen saver status
X6# ]
X2*]
Set the OSD menu duration to
View the OSD menu duration.
Output sync is instantly disabled with no active video from the
selected input (not allowed for MDUR command).
X4# ]
,filename Assign logo filename to logo slot
] View the logo filename assigned to logo
X4#
.
X4)
.
X4)
for the
X2*
.
X6#
.
X2*
.
X4#
.
|
.
65