Extron electronics IN1804 Series User Manual page 64

X6@ = Power Save mode
X6# = Screen saver status
X6$
= Port timeout
X6%
= Start point for UART ports
X6^ = DTP remote power
X6& = TP format
X7) = Hot plug change or detection
X7! = Audio output mute
X7@ = Key effect variable
X7# = Key effect setting
X7$ = Key effect
X7% = Contact/Tally port number
X7^ = Contact/Tally port mode and
status
X8) = Audio playback file slot number
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
0 = Full power mode (default)
1 = Lowest power state — TP remote power and TP
links are disabled. Input LEDS 1 through 4 cycle at a
500 ms interval.
2 = Lower power mode — TP links remain active,
including remote power, and Ethernet to RS-232
insertion. Input LEDS 1 through 4 cycle at a 500 ms
interval.
9 = Low power state due to over-heating
(query-response only)
0 = Active input detected, timer not running
1 = No active input, timer running, output sync still active
2 = No active input, timer expired, output sync disabled
Set time in seconds before the port connection times out.
1 (10 seconds) through 65000 (650,000 seconds)
Default = 30 (300 seconds)
Start point for UART ports:
X6%
TP IN4 = + 1 (IN1804 DI only)
X6%
TP OUT 1A = + 3 (IN1804 DO only)
Default = 2000
0 = No remote power (default)
1 = DTP
2 = DTP2
0 = DTP format (default)
1 = XTP format
2 = HDBaseT format
1 = A new sink has been connection (assertion)
2 = HDBaseT format (available only on Output 1A of the
IN1804 DO).
1 = Local and remote (DTP only) 5-pole captive screw
analog audio output connectors (applies to
IN1804 DO only)
2 = Embedded TMDS audio output
0 = Transparency (available only when
1 = Red of RGB key (available only when
2 = Green of RGB key (available only when
3 = Blue of RGB key (available only when
4 = Level key (available only when
0 through 255
0 = Disabled
1 = Transparency
2 = RGB key
3 = Level key
4 = Alpha key
1 through 7
0 = Open
1 = Closed
1 through 16
Highest priority for playback is slot 1, descending to
lowest priority slot 16.
X7$
= 1)
X7$
= 2)
X7$
= 2)
X7$
= 2)
X7$
= 3)
56