Extron electronics IN1804 Series User Manual page 81

Command
Advanced Configuration (continued)
HDCP Output Mode
Set HDCP mode
View HDCP mode
HDCP Notification
Set HDCP notification
View HDCP notification
Video Signal Presence
View signal presence
Front Panel Lock (Executive Mode)
Enable lock (mode 1)
Enable lock (mode 2)
Disable lock mode
View lock mode status
KEY:
X@
= Output
X2(
= Front panel lock (executive mode)
X4^
= HDCP output mode
X4&
= HDCP notification mode
NOTE: A green screen with HDCP Content orbiting text or an HDCP user logo is visible only if a single non-
compliant display is attached, or if both attached displays are non-HDCP compliant. If the IN1804 is connected to
one compliant and one non-compliant display at the same time, only a green or black screen with no text or logo
appears on the non-compliant display.
X6!
= Video signal status
ASCII Command Response
(Host to Scaler) (Scaler to Host)
E X@ X4^ }
S * HDCP HdcpS
E X@ } X4^]
S HDCP
E X4& }
N1* HDCP HdcpN1*
E } X4&]
N 1 HDCP
E } X6!
OLS *...*
Verbose modes 2 and 3:
IN00•
1X
Exe1
2X
Exe2
0X
Exe0
X2(]
X
1 =TP Output 1A (IN1804 DO)
HDMI output 1A (IN1804 and IN1804 DI)
2 = HDMI output 1B
0 = Off or disabled (front panel controls fully accessible) (default).
1 = Mode 1 — Complete front panel lockout
2 = Mode 2 — Input switching only
0 = Off — Disable all HDCP authentication and encryption attempts.
1 = Follow input (default).
2 = Always encrypt.
3 = Follow input (with continuous authentication trials).
4 = Always encrypt (with continuous authentication trials).
0 = Black screen — Notification disabled (mute output)
1 = Green screen with OSD bug (orbiting message) (default)
2 = User image with black screen background
0 = Video, TMDS, or DP signal not detected
1 = Video, TMDS, or DP signal detected
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
Additional Description
X@ X4^]
* Set the HDCP output mode
output
View the HDCP output mode for output
X@
.
X4&]
Set the HDCP notification to
View the HDCP notification selection.
Global setting:
X6!]
View video signal status
through 4.
X6! X6!]
*...*
]
Lock all front panel controls.
]
Lock all front panel functions except
input switching.
] Unlock all front panel controls. All front
panel adjustments can be made.
View current lock mode status
X4^
for
X@
.
X4&
.
X@
always = 1.
X6!
for inputs 1
X6$
.
73