Device Status Panel - Extron electronics IN1804 Series User Manual

Figure 49.
4. If you want to assign a user password, repeat steps 2 and 3 in the
figure 49,
5. When finished, click
password, click
To remove an assigned password:
1. In the
2. Enter a single space in the appropriate
3.
Click
Save

Device Status Panel

The
Device Status
time, time zone, the amount of time the device has been running (
temperature in degrees Celsius.
Syncing the IN1804 to the PC
To set the IN1804 date and time to match that of your computer:
Click
Sync to PC
the message shown in figure 50 appears in the upper-right corner of the screen.
Figure 50.
Passwords Dialog Box with Administrator Password Entered
.
3
to set the passwords. To close the window without saving a
Save
or the in the upper-right corner.
Cancel X
or
Change Admin Password
.
panel (see figure
at the bottom of the
Sync to PC Success Message
IN1804 Scaling Presentation Switcher • Internal Web Pages
field, enter a single space.
Change User Password
field.
Confirm Password
46, , on page 91) displays the current date,
4
panel. When the sync is completed,
Device Status
panel (see
User
), and internal
Uptime
94