Input Submenu - Extron electronics IN1804 Series User Manual

Input Submenu

Figure 21.
The
Input
• INn: Input Type —
On standard and DO models: Displays the format of the selected input
•
(read-only).
On IN1804 DI: If input 4 (the DTP2/XTP input) is selected, use the
•
buttons to select between
INn: Film Detect — Film mode detection helps maximize image detail and sharpness
•
for video sources originating from film. After pressing
 and
If is selected, the IN1804 detects and applies reverse pull-down for:
On
3:2 pull-down for 480i and 1080i @ 59.94 Hz
•
2:2 and 24:1 pull-down for 576i and 1080i @ 50 Hz
•
• Active Video — This view-only field shows the width in pixels (the
height in lines (the
HDCP Authorized — This feature determines if a digital input reports as an HDCP
•
authorized sink to a source. Select this item to enable or disable HDCP communication
by selecting whether the IN1804 input reports to the source as an authorized HDCP
sink. After pressing
between
For source devices that require encryption, enable HDCP Authorized. If HDCP
Authorized is disabled for sources that require encryption (for example, a Blu-ray player),
the output is muted or a warning message is displayed. Some source devices may
encrypt their output even if the source material does not require HDCP encryption,
preventing content from being displayed on a non-HDCP compliant display. Disable
HDCP Authorized to allow the output of the scaler to remain unencrypted.
NOTE: HDCP Authorize is permanently enabled on DisplayPort Input 1.
Input Submenu (IN1804 Standard and IN1804 DO)
submenu adjusts the active input.
DTP

buttons to toggle between
value) of the applied input signal.
V
to select this item, press the
Enter
(default) and .
On Off
IN1804 Scaling Presentation Switcher • Operation
and . For all other inputs, this item is read-only.
XTP
to select the item, press the
Enter
(default) and .
On Off

or


and

value) and the
H
button to toggle
30