Audio Submenu - Extron electronics IN1804 Series User Manual

• Logo Position — This item lets you specify a position for the selected logo on the
display relative to the upper-left corner of the logo. The default is
To position the logo:
1. Press the
Logo
2. Press the
or
3. Press the
4. Press

Audio Submenu

Figure 24.
The
Audio
to select this item, then press the
Enter
• Audio Mute —Select this item to mute and unmute the output audio. You can make
the following audio mute selections:
• Off
• Analog
• Digital
• On
button to select
Enter
Position item appears as a single field on the OSD.

or buttons to select the horizontal position of the logo, and the

button to select the vertical position.

button to confirm your selections.
Enter
to return to the
 Output
Audio Submenu
submenu allows you to configure the audio settings. To use this submenu, press
— Audio output is not muted (default).
— Mutes the analog audio output only.
— Mutes the embedded digital audio output only.
— Mutes both the analog and the embedded digital audio outputs.
IN1804 Scaling Presentation Switcher • Operation
from the
Logo Position Output
submenu.

or button to step through the selections.

.
H: 0000 V: 0000
submenu. The
u
36