Extron electronics IN1804 Series User Manual page 61

X3$ = Verbose mode
X3% = Model name
X3^ = Part number
X3( = Aspect ratio setting
X4) = Screen saver mode
X4@ = Video output mute
X4# = User logo number
X4$ = HDCP status
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
0 = None (default for LAN connection)
1 = Verbose mode (default for RS-232 and USB
connection)
2 = Tagged responses to queries
3 = Verbose mode and tagged responses
NOTES:
•
In verbose response mode, the IN1804
returns unsolicited responses for value
and setting changes that may result from
a signal change, or a setting adjustment
made via another interface.
Example: The IN1804 can send out a
notice of a change in some setting without
receiving a query via a PC or a control
system. That change could have been a
result of an internal process or a selection
made via the PCS program. This is a
verbose (wordy) relationship between the
controller and a connected device.
•
If tagged responses are enabled, all
"view" commands return the command
string plus the data, the same as in
responses for setting a value. For example:
X!
Command: *\
X!
Response: Vtyp *
(untagged)
IN1804, IN1804 DI, or IN1804 DO
IN1804 (standard) — 60-1699-01
IN1804 DI — 60-1699-02
IN1804 DO — 60-1699-03
1 = Fill — Each input rate fills the entire output
raster (default).
2 = Follow — Each input rate is displayed with its
native aspect ratio.
1 = Black screen (default)
2 = Blue screen with OSD text
3 = User image on black screen
0 = Unmute
1 = Mute video to black screen
2 = Mute video and sync
1 through 16. The response is three digits padded with
leading zeros.
101 = No signal, screen saver user logo
201 = User HDCP logo
0 = No sink or source device detected
1 = Sink or source detected but no HDCP present
2 = Sink or source detected with HDCP
X#] X#]
or
53