Extron electronics IN1804 Series User Manual page 65

X8! = Unit name
X8@ = Playback state
X8#
= Repeat
X8$ = Playback delay
X8% = Configuration type
X8^ = Number of open connections
X8& = IP address
X8* = Gateway IP address
X8( = Subnet mask
X9) = Hardware (MAC) address
X9! = Password
X9@ = Default unit name
X9# = Subnet mask in CISG
commands
NOTE: Unless otherwise indicated, commands are not case-sensitive.
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
Unit name — A text string of up to 32 characters.
• A-Z, 0-9, and the hyphen (-) are permitted.
• The first character must be a letter.
• The last character cannot be a hyphen.
• No distinction is made between uppercase and
lowercase letters.
• Space or blank characters are not permitted.
0 = Stop or stopped
1 = Play or playing
0 = No
1 = Yes
NOTE: Setting the repeat mode to 0 during
continuous playback causes play to stop after the
end of the current iteration.
Number of seconds to wait before the audio file repeats
X8#
(valid only if = 1 [repeat]).
1 through 300 (1-300 seconds delay between audio
playbacks)
0 = No delay
0 = IP configuration (ip.cfg)
2 = Unit-specific parameters (box.cfg)
0-<maximum number of open connections>
Format nnn.nnn.nnn.nnn
Default = 192.168.254.254
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
Format nnn.nnn.nnn.nnn
Default = 0.0.0.0
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
Format nnn.nnn.nnn.nnn
Default = 255.255.255.0
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
00-05-A6-xx-xx-xx
• Length is 1-128 characters.
• All human-readable characters are permitted except
|
.
• The password cannot be a single space.
• Passwords are case-sensitive.
• A user password cannot be assigned if no
administrator password exists. An E14 error code is
returned.
• If the admin password is cleared, the user password
is cleared as well.
Combination of the model name and the last three
hexadecimal character pairs of the unit MAC address
(Example: IN1804-DO-15-9E-B0)
Prefix representing subnet mask bits (subnet mask value
in CISG commands).
Default = /24, which represents the default subnet mask,
255.255.255.0.
57