Models; Integrated Digital Twisted Pair Extension - Extron electronics IN1804 Series User Manual

Models

The IN1804 is available in the following models:
Model
IN1804
IN1804 DI
IN1804 DO

Integrated Digital Twisted Pair Extension

The DTP2 inputs and outputs are proprietary signals that are created within any of
the Extron DTP Extender systems and transmitted over a single shielded twisted pair
(STP) cable. The IN1804 accepts DTP inputs from transmitting devices such as the
DTP T USW 333.
NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
optimal performance.
The IN1804 DI includes one DTP2/XTP twisted pair input, while the IN1804 DO has one
DTP2/XTP/HDBT output.
• The IN1804 DI can receive signals from remote DTP or DTP2 transmitters at a
conference table, lectern, or wall. It can also be integrated into an XTP CrossPoint
matrix switcher system.
• The IN1804 DO can transmit to a DTP or DTP2 receiver or directly to a HDBaseT
enabled display device. It can also be integrated into an XTP CrossPoint matrix switcher
system.
Additionally, the IN1804 DI and IN1804 DO can send power to selected DTP or DTP2
endpoints over the same shielded CATx cable, streamlining system design and installation.
DTP transmitters and receivers are available in compact, low-profile enclosures, plus
decorator-style wallplate and floorbox versions to suit the installation requirements of a
specific application.
RS-232 and IR signal insertion
Bidirectional RS-232 and IR signals can be inserted from a control system and transmitted
over the single shielded CATx cable together with the video and audio, enabling control
of a source or display. The DTP2/XTP/HDBT output on IN1804 DO can be configured for
compatibility with HDBaseT-enabled displays to send digital video and embedded audio,
plus bidirectional RS-232 and IR signals up to 330 feet (100 meters) over a shielded CATx
cable.
Matrix switcher integration
In addition to supporting DTP endpoints, the IN1804 DI and IN1804 DO can be integrated
into an XTP CrossPoint matrix switcher system. This enables facility-wide AV system
applications with a centralized AV signal distribution infrastructure, as well as several
presentation spaces with local AV switching and processing.
Description
Standard model Inputs: 1 DisplayPort, 3 HDMI
Outputs: 2 HDMI
DTP2 input Inputs: 1 DisplayPort, 2 HDMI, 1 DTP2/XTP
Outputs: 2 HDMI
DTP2 output Inputs: 1 DisplayPort, 3 HDMI
Outputs: 1 DTP2/XTP/HDBT, 1 HDMI
IN1804 Scaling Presentation Switcher • Introduction 2