Extron electronics IN1804 Series User Manual page 62

X4% = Video switch effect
X4^ = HDCP output mode
X4& = HDCP notification
X4* = HDMI output format
X5) = Audio output volume
X5! = Audio output format
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
0 = Cut through black* — The input instantly cuts
to black, then cuts to the newly selected input with
no fading.
1 = Fade through black* — The input fades to black
before the newly selected input fades in.
2 = Seamless fade* (default) — Displays a final frozen
frame of the previous input while the newly selected
input fades in.
3 = Seamless cut — The last frame of video freezes on
the screen, then cuts to the newly selected input.
*Between input switches the audio ramps down and then
up.
0 = Off — Disable all HDCP authentication and encryption
attempts.
1 = Follow input (default).
2 = Always encrypt.
3 = Follow input (with continuous authentication trials).
4 = Always encrypt (with continuous authentication trials).
0 = Black screen — Notification disabled (mute output)
1 = Green screen with OSD bug (orbiting message)
(default)
2 = User image with black screen background
0* = Auto — HDMI RGB Full to a CEA sink, DVI to a
non-CEA sink***
1* = DVI — RGB 444, 0-255. Valid for output rates up to
165 MHz.
2 = HDMI RGB Full — RGB 444
3 = HDMI RGB Limited — RGB 444
5 = HDMI YUV 444 Limited — YUV 444
7 = HDMI YUV 422 Limited — YUV 422
9** = HDMI YUV 420 Limited — Used for transmitting
4K @ 60 Hz at a 4K @ 30 Hz character rate.
* If the IN1804 is in DVI mode and a rate greater than
165 MHz is selected, the HDMI output defaults to
HDMI RGB 444 Full.
** 420 formats are available only when the current HDMI
output resolution is 4K/UHD @ 50, 59.94, or 60 Hz
and use half the TMDS character rate.
X4*
If is set to 9 and the output rate is changed to a
rate other than 64-66 Hz or 74-76 Hz,
automatically set to 0, and an SIS response is
broadcast.
*** DVI mode applies only up to a 165 MHz pixel clock.
-100 to 0 in 1 dB steps
Example: -100 = -100 dB and 0 = 0 dB
Default = -10
Response is three digits with a leading + or – sign.
1 = Dual mono
2 = Stereo (default)
X4*
is
54