Extron electronics IN1804 Series User Manual page 67

Command
Input Configuration (continued)
Auto-Image
Execute
Execute and fill
Execute and follow
HDCP Authorize
DP Input 1 is fixed with HDCP Authorize enabled and cannot be configured.
NOTE:
HDCP authorized
Query HDCP authorized
status
Input Aspect Ratio (per input)
Set for fill
Set to follow
View aspect setting
Active Pixels and Lines
View active pixels
View active lines
3:2, 2:2, and 24:1 Film Mode Detection
Auto
Off
View film mode setting
KEY:
X!
= Input selection
X*
= Active pixels
X(
= Active lines
X1)
= On or Off status
X3(
= Aspect ratio setting
ASCII Command Response
(Host to Scaler) (Scaler to Host)
1*0A
Img1*0
1*1A
Img1*1
1*2A
Img1*2
E X! X1) }
E * HDCP HdcpE
E X! } X1)]
E HDCP
E X! }
*1ASPR Aspr
E X! }
*2ASPR Aspr
E X! } X3(]
ASPR
E X! } X*]
APIX
Verbose modes 2 and 3:
Apix
E X! } X(]
ALIN
Verbose modes 2 and 3:
Alin
E X! }
*1FILM Film
E X! }
*0FILM Film
E X! } X1)]
FILM
IN1804 Scaling Presentation Switcher • SIS Configuration and Control
Additional Description
] Execute an Auto-Image for the current
input (follows the current aspect ratio).
] Execute an Auto-Image and fill the
output raster.
] Execute an Auto-Image and maintain
the aspect ratio of the current input.
X! X1)]
* Configure HDCP Authorize for input
View HDCP Authorized setting for input
X!
.
X! ]
*1 Set input
output raster.
X! ]
*2 Set input
native aspect ratio.
View current aspect ratio setting
input
View active pixels
X! X*]
*
View active lines
X! X(]
*
X! ] Enable automatic film mode detection
*1
for input
X! ]
*0 Disable film mode detection for input
View the film mode setting for input
1 = DisplayPort input 1 (all models)
2 = HDMI or DVI input 2 (all models)
3 = HDMI or DVI input 3 (all models)
4 = HDMI or DVI (standard and DO models)
TP (IN1804 DI)
Response is four digits, padded with zeros.
Response is four digits, padded with zeros.
0 = Off or disabled
1 = On or enabled (default)
1 = Fill — Each input rate fills the entire output raster (default)
2 = Follow — Each input rate is displayed with its native aspect
ratio.
X!
to always fill the entire
X!
to maintain its current
X3(
X!
.
X* X!
on input .
X( X!
on input .
X!
(default).
X!
.
for
X!
.
X!
.
59