Delta DRV70L Series User Manual page 8

 Improper operations may damage the robot.
 When a collision occurs involving the robot, first turn off the power to the robot
 Use a safety lock on the railing switch when entering the railings to operate the
 Turn off the power before removing the teaching pendant cable from the DCV
 The location of the interlock switch between the structure of the safety
 Do not make any changes to any components on our company's handheld
 Short-circuiting any safety protection signals on the DCV controller is strictly
 When operating the robot, all workers are prohibited from standing close to or in
 Do not unplug any cables on the DCV controller while the robot is operating to
 Do not open the protective cover or protection device while the machine and
 Maintenance Safety
 Properly perform maintenance and inspection according to the manual to prolong
 Add a safety lock on the power switch on the controller when performing
 Replacing damaged internal DCV controller components with other brands of
 Make sure foreign objects do not get attached to, or enter the robot when
 Use only oil that meets the specifications during maintenance to prevent damaging
 Protection devices and repair doors in the danger areas that need to be opened or
 Workers performing maintenance or repairs to the robot or robot system should
 The processing of waste material should comply with local laws and regulations,
and then check the robot's components and cables to make sure that they are
not damaged before turning the power back on and performing operations
again.
robot to prevent the railings from closing suddenly, causing the robot to be
activated accidentally.
controller to prevent damage to the teaching pendant.
protection device and the protection device should comply with EN ISO 14120
and EN ISO 14119 standards, and the safety distance should be designed
according to EN ISO 13857 standards.
teaching pendant, including the Emergency Stop and Enable switches. Doing so
lowers the safety performance and level, or may even eliminate the safety
protection.
prohibited, and our company will not be held responsible for any work accidents
that may occur.
the robot working range to prevent injuries to the workers.
prevent damage to the DCV controller.
robot are operating.
the useful life of the robot.
maintenance or repair operations to the robot, and place a "Do not power on" safety
warning in an obvious place.
components is prohibited to prevent danger or decrease the safety performance
levels.
performing maintenance or inspection.
the performance of the robot or the mechanical components.
removed regularly for the purpose of operations, maintenance, cleaning or
configuration should be interlocking.
receive the necessary process training to execute the tasks required. Use only
genuine parts to prevent grave dangers to the workers.
and should be treated carefully.
7