Caution - Delta DRV70L Series User Manual

Caution

Read this manual carefully before operating the robot to ensure proper use. In addition, keep this manual
in a safe location for reference whenever required.
You will learn do to the following tasks when you have finished reading this manual:
 Set up the robot in a safe and protected location with safety protection such as railings and gratings.
Do not operate the robot outside the safety protection area to prevent injuries to the operator.
 The installation environment must have no steam, corrosive gas or flammable gas to prevent
accidents such as malfunctions or explosions.
 Read this manual carefully before wiring the DCV controller and the robot to prevent damage to the
robot and the DCV controller.
 The equipment must be grounded properly.
 Do not disassemble or change the wiring while the power is on to prevent electrical shocks.
 Ensure that the emergency stop device can be operated at any time before powering the robot on.
 Turn off the power to the DCV controller before performing repairs or maintenance.
 Do not get close to the operating range of the robot before and after powering on for operations, and
leave a warning in an obvious place to prevent injuries or fatalities to the workers.
If you have questions concerning the robot use, please contact your dealer or our company's Customer
Service Center.
The copyright of this manual belongs to Delta Electronics Inc. This manual cannot be copied or
duplicated in whole or part without written approval from our company. Its contents must not be passed
on to a third party, nor can it be used for any unauthorized purposes. Any violations will result in a
lawsuit.
The contents and specifications in this manual may change without further notification. You can
download the latest version from the Delta website.
2