Delta DRV70L Series User Manual page 6

 Installation Safety
 Read this manual carefully before installing the robot to make sure that you install
 The DRV70L and DRV90L Series robots can work only with our company's DCV
 Follow the instructions in this manual to correctly transport and install the robot and
 Related licenses are required for workers who operate equipment such as stackers
 Workers must wear proper safety work clothes, helmets, gloves and shoes when
 On automated production lines, the operating range of multiple robots may overlap.
 Please do not add additional equipment such as cables or hoses inside the
 Use only clean dry air (CDA) for the air source at the robot air hose input terminal.
 You can use the robot in IP40 environments and it is able to resist solid matter with
 Follow the manual and install the safety protection devices such as railings,
 Install the user operating buttons and alarm indicators outside the railings to ensure
 Do not turn the power on and off frequently to prevent damage to the DCV
 Install the robot system under the specified conditions; in the foreseeable use
 Properly ground all robot systems before connecting the power.
 The final system integrator should install protection devices to prevent users from
 Removing or changing the locations of any safety warning labels on the equipment
 Performing any unsafe actions at the safety warning locations on the equipment is
 Workers must not stand underneath when using equipment such as stackers or
 Placing objects on top of the robot, DCV controller or cables is strictly prohibited to
 Changing or modifying the robot and DCV controller is strictly prohibited to prevent
 Installation and wiring the robot by unqualified people without the related
the robot in a suitable location and environment to avoid affecting the mechanisms
and useful life of the electronic components, or encounter other safety problems.
Series controller. Do not modify the machine and wiring or use it with other
controllers. Our company will not be held responsible for any injuries or fatalities
caused by accidents that result from doing so.
DCV controller to prevent damage to the robot or DCV controller.
or forklifts.
installing the robot to ensure their safety.
Make sure that they do not interfere with one another to prevent damage to the
robots from impacts.
mechanism. When installing the robot's exterior cables, ensure that the cables and
mechanisms do not interfere with one another during operations.
a diameter over 1mm. It is not protected against any liquids.
gratings, regional lasers or pressure pads to prevent injuries or other dangers to the
workers from impact with the robot in its operating range.
safe use. The operating interface should be at a suitable height (0.6–1.7 m) for
operators to reach easily.
controller.
period, the robot may not be tilted or moved by uncontrolled methods during
transportation, assembly, disassembly, suspended or discarded periods.
getting close to the danger area.
is strictly prohibited to prevent danger and injuries to the workers.
strictly prohibited to prevent injuries to the staff.
forklifts to move the robot to prevent injuries or other dangers.
prevent damage to the robot, DCV controller or cables.
damage to the robot or DCV controller and danger to the workers. Our company will
not be held responsible for any work accidents.
professional knowledge or licenses is strictly prohibited.
5