DRV70L/90L Series Manual
(6) Connecting Input Power
Use only single-phase 220–230 Vac, 50/60 Hz input power. The input power must be properly grounded,
as shown in Figure 7.5.
L and N are power cables and E is the ground cable.
Figure 7.5 Quickstart wiring power wiring example
(7) Turn on the power to the DCV controller and switch the power switch on the DCV controller from
OFF to ON, as shown in Figure 7.6.
Figure 7.6 Quickstart wiring power switch ON
(8) Refer to the DROE software manual for robot operations.
76