Table of Contents
Advertisement
2.6 Battery Safety
Cause injury to personnel
l
Damage itself or other equipment
l
Reduce system reliability and performance
l
Platforms are intended for use on generally level floors, in wheelchair-accessible areas.
The body of the platform must not come into contact with liquids. The drive wheels can tol-
erate damp floors, but the body of the platform must remain dry.
If there is any doubt concerning the application, ask your local Omron Support to determine if
it is an intended use or not.
Platform Modifications
If the user or integrator makes any changes to the platform, it is their responsibility to ensure
that there are no sharp edges, corners, or protrusions.
Note that any change to the platform can lead to loss in safety or functionality. The user or
integrator must ensure that all safety features are operational after modifications.
2.6 Battery Safety
Store batteries upright (in an environment with relative humidity less than 70%) at:
l
Never expose the battery to water. If the battery is leaking, submerge in mineral oil and
l
contact your local Omron Support
In case of fire, use a type D extinguisher: foam, dry chemical, or CO
l
2.7 Additional Safety Information
Contact your local Omron Support for other sources of safety information:
Mobile Robot LD Safety Guide
The
Mobile Robot LD Safety Guide
OEMs. It also gives resources for information on relevant standards. It ships with each plat-
form.
24
One month: +5 to 45°C (41 to 113°F)
n
One year: 20 to 25°C (68 to 77°F)
n
provides detailed information on safety for LD Platform
LD Platform OEM User's Guide
2.
11970-000 Rev H1
Advertisement
Table of Contents
