HP 8712ET User Manual page 346

Max Limit
Max Search
MEAS 1
MEAS 2
Meas Annot
ON off
Meas OFF
Measure
Standard
Hardkey/Softkey Reference
M
Softkey in the edit limit (min/max) menu. Use this key to set the
maximum limit for the marker limit function that is currently
highlighted in the on-screen table.
See "To Use Marker Limit Functions" on page 4-32
information.
Access Keys:
DISPLAY
Edit Limit (Min/Max)
Softkey in the marker search menu. Places the active marker at the
frequency point of maximum amplitude. If tracking is off, the marker
remains at that frequency. If tracking is on, the marker moves to the
maximum point with each sweep.
See "Using Markers" on page 4-3
Access Keys:
MARKER
Hardkey in the MEAS area. Turns on measurement channel 1 as the
active channel. Default mode is the transmission measurement.
Hardkey in the MEAS area. Turns on measurement channel 2 as the
active channel. Default is measurement channel off; selecting it
changes the setting to the most recent type of measurement made on
this channel, or, if not previously used, to the transmission
measurement.
Softkey in the annotation options menu. Allows you to toggle the
measurement channel annotation at the top of the display on or off.
See "Customizing the Display" on page 4-45
Access Keys: DISPLAY
Softkey in the
MEAS 1
measurement channel off.
Softkey in several calibration menus. Measures a calibration standard
as part of your selected calibration procedure.
8-54
Limit Menu Mkr Limits
for more information.
Marker Search
for more information.
More Display Annotation Options
or menu. Turns the active
MEAS 2
for more
ET User's Guide