HP 8712ET User Manual page 354

None
Normalize
Normalize
on OFF
Notch
Number of
Points
Numeric
Hardkey/Softkey Reference
N
Softkey in the IBASIC display menu. Displays the measurement data
on the full screen. (Does not show the IBASIC program on the display
at all.)
Softkey in the DISPLAY
Data->Mem and
errors only. The only type of measurement "calibration" (other than
detector zero) for power or conversion loss measurements.
NOTE
See "To Perform a Normalization Calibration" on page
information.
Softkey in the
CAL
normalize "calibration" described above.
Softkey in the marker search menu. Automatically calculates −6 dB
(default) or other user-specified bandwidth, center frequency, and Q of
a notch filter.
See "Using Markers" on page 4-3
Access Keys:
MARKER
Softkey in the
MENU
measurement points in a sweep: 3, 5, 11, 21, 51, 101, 201 (default),
401, 801, or 1601. As the number of points increases, frequency
resolution increases and sweep speed decreases.
See "To Reduce the Number of Measurement Points" on page 5-5
information on how the number of measurement points selected can
affect your measurements.
Softkey in the clock format menu. Formats the real-time internal clock
to display the number of the month (for example, 03 for March).
Access Keys:
SYSTEM OPTIONS
Clock Format
8-62
menu. Equivalent to selecting
Data/Mem . Corrects for frequency response
This type of "calibration" is not interpolated:
changes in frequency or the number of points
invalidate it.
menu. Toggle to ON if you want to select the
for more information.
Marker Search
menu. Allows selection of the number of
System Config
6-11for more
for
Set Clock
ET User's Guide