HP 8712ET User Manual page 179

Rf network analyzers
Hide thumbs Also See for HP 8712ET:
Table of Contents

Advertisement

NOTE
4. If you have previously saved any files to this disk, they will now be
listed on the display.
5. The fast recall feature utilizes only the first seven files listed that
contain instrument state, calibration, or measurement data.
6. If you have not previously saved any files to this disk, you may want
to save a few instrument states now, to follow along.
7. Press
Prior Menu FastRecall on OFF
measurement display now reappears on the screen and that there are
file names next to the first seven softkeys. (If any of the softkeys are
blank, it's because you had less than seven files saved on the disk.)
The files are placed on the softkeys in the order in which they appear
in the disk's directory table.
You may want to use the
meaningful names. See
information on renaming files.
8. To "fast recall" an instrument state, press the softkey next to the file
that contains the instrument state.
9. The fast recall toggle will remain on (even when the analyzer is
) until manually turned off.
PRESET
10. With the fast recall feature turned on, you will always be only 1 or 2
key presses away from recalling an instrument state.
11. With an external keyboard connected to the rear panel DIN
connector, keys F1 through F7 are equivalent to pressing softkeys 1
through 7 on the analyzer. See
information on connecting and using an external keyboard.
ET User's Guide
Saving and Recalling Measurement Results
Rename File
feature to give your files more
"Other File Utilities" on page 4-63
"Using a Keyboard" on page 4-82
Using Instrument Functions
. Note that the
for
for
4-61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 8714et

Table of Contents