HP 8712ET User Manual page 386

Unmount
NFS Device
Update
Corr Const
Upper
User BEGIN
on OFF
User
Cal Kit (A–J)
User ID
Hardkey/Softkey Reference
U
U
Softkey in the NFS device setup menu. Displays the NFS device table,
which lists the currently mounted NFS devices. Select the device you
want to remove from the table and press the softkey which corresponds
to that device.
See The LAN Interface User's Guide Supplement for more information.
Access Keys: SYSTEM OPTIONS
Softkey in the service menu. Displays a menu to store correction
constants to a 3.5" floppy disk or internal non-volatile memory, or to
load correction constants from a disk.
See the Service Guide for more information.
Access Keys: SYSTEM OPTIONS
Softkey in the IBASIC display menu. Displays the IBASIC program on
the upper half of the screen and measurement data on the lower half.
Access Keys:
SYSTEM OPTIONS
Softkey in the
BEGIN
See "The User BEGIN Function" on page 3-14
Softkeys in the more cal kits menu. Assigns any of User Cal Kits A–J
to the selected port in the cal kit table (viewable with
More Cal Kits ).
See "Calibration Kits" on page 6-16
Access Keys: CAL
Softkey in the authentication menu. Allows you to enter a User ID for
your NFS remote file system. The default User ID value is 2001.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Authentication
8-94
LAN
Service
IBASIC
menu.
for more information.
More Cal Cal Kit
LAN
NFS Device Setup
IBASIC Display
for more information.
Cal Kit
More Cal Kits
NFS Device Setup
ET User's Guide
and