HP 8712ET User Manual page 340

Limit Options
Limit Test
on OFF
Limit Text
ON off
Lin Mag
Hardkey/Softkey Reference
L
Softkey in the limit options menu. Displays a menu that allows you to
turn visible limit lines on or off, and to reposition and enable/disable
the pass/fail indicator and text.
See "Customizing the Display" on page 4-45
Access Keys:
DISPLAY
Softkey in the limit menu. Toggle to ON if you want to view the limit
test status. When limit test is enabled, "FAIL" or "PASS" notation may
be displayed on the CRT. Pass/fail information is also routed to the
LIMIT TEST TTL IN/OUT connector on the rear panel of the analyzer.
The limits need not be visible (toggled to ON) for the limit test to be
valid.
See "Using Limit Testing" on page 4-28
Access Keys:
DISPLAY
Softkey in the limit options menu. Allows you to enable or disable the
PASS or FAIL text when limit testing is on. Does not enable or disable
the fail icon. The fail icon is enabled/disabled with the Limit Icon
ON off softkey.
See "Customizing the Display" on page 4-45
Access Keys:
DISPLAY
Softkey in the
FORMAT
terms of transmission coefficient, displays a reflection trace in terms of
reflection coefficient, and displays an aux input trace in volts (from
1 mV/div to 20 V/div).
8-48
for more information.
Limit Menu
for more information.
Limit Menu
for more information.
Limit Menu Limit Options
menu. Displays a transmission trace in
ET User's Guide