HP 8712ET User Manual page 384

Tracking
on OFF
Trans Port
Extension
Transmissn
Transmissn
Tracking
Trigger
Trigger Source
Hardkey/Softkey Reference
T
Softkey in the marker search menu. Toggle to ON if you want the
marker search functions to be updated with each sweep. When toggled
OFF (default setting), the functions are performed only once, when
selected.
See "Using Markers" on page 4-3
Access Keys:
MARKER
Softkey in more cal menu. Allows compensation for phase shift due to
an extended measurement reference plane on the TRANSMISSION
RF IN port.
See "Port Extensions" on page 5-17
Access Keys:
CAL
Port Ext's on OFF
Softkey in the amplifier, filter, broadband passive, cable (Option 100
only) and measurement menus. Selects the forward transmission type
of measurement. Power is output from the RF OUT port and measured
at the RF IN port.
See "Measuring Transmission Response" on page 3-15
information.
Access Keys:
MEAS 1
Filter or Broadband Passive
Softkey in the cal check menu. One of the corrected measurement
uncertainties that can be viewed after performing a cal check.
Refer to Chapter 6 for more information on using cal check.
Access Keys: CAL
Softkey in the source
triggering the analyzer. The analyzer can be triggered continuously
(default setting) or once. It can be triggered internally (default setting),
externally, or externally one frequency point at a time.
Softkey in the trigger menu. Displays the menu for the choice of
internal or external triggering.
Access Keys:
MENU
8-92
for more information.
Marker Search
for more information.
More Cal Port Extensions
or . Also
MEAS 2
or Cable
Cal Check View Cal Check
. Displays the menu with choices for
MENU
Trigger
for more
, Amplifier
BEGIN
(Option 100 only)
ET User's Guide
or