HP 8712ET User Manual page 324

Fine 15 Hz
Flatness
FORMAT
Format
3.5" Disk
Format
Disk Menu
Format
NonVol RAM
Hardkey/Softkey Reference
F
Softkey in the system bandwidth menu. This is the narrowest system
bandwidth available. (Medium wide is the default system bandwidth.)
See Chapter 5 for information on how system bandwidth can affect
your measurements.
Access Keys:
AVG
Softkey in the marker math menu. Calculates the flatness of a
user-defined trace segment.
See "To Use Marker Math Functions" on page 4-18
information.
Access Keys:
MARKER
Hardkey in the CONFIGURE area. Pressing this key displays a menu
of choices for the display format of your measurement.
The choices available are: Log Mag, Lin Mag, SWR, Delay, Phase,
Smith Chart, Polar, Real, Imaginary, and Impedance Magnitude. For
more information on each of these choices, see its entry in this chapter.
Softkey in the format disk menu. Formats a disk in the analyzer's
built-in disk drive in DOS format.
See "Formatting a Floppy Disk" on page 4-66
Access Keys:
SAVE RECALL
Softkey in the file utilities menu. Displays the format disk menu to
select either the internal non-volatile memory, internal volatile
memory, or 3.5" floppy disk (in the analyzer's built-in disk drive).
Access Keys: SAVE RECALL
Softkey in the format disk menu. Formats the internal non-volatile
RAM disk.
CAUTION
Access Keys: SAVE RECALL
8-32
System Bandwidth
Marker Functions
File Utilities
File Utilities
Formatting the internal non-volatile RAM disk
erases all existing files and directories on the
disk.
File Utilities
for more
Marker Math
for more information.
Format Disk Menu
Format Disk Menu
ET User's Guide