HP 8712ET User Manual page 363

Reflection
Reflection
Tracking
Remote IP
Addr/Host
Softkey in the amplifier, filter, broadband passive, mixer, cable (Option
100 only) and measurement menus. Selects the forward reflection type
of measurement. Power is output from the RF OUT port and also
measured there.
See "Measuring Reflection Response" on page 3-32
information.
Access Keys:
MEAS 1
Broadband Passive
Softkey in the cal check menu. One of the corrected measurement
uncertainties that can be viewed after performing a cal check.
Refer to Chapter 6, "Calibrating for Increased Measurement Accuracy"
for more information on using cal check.
Access Keys:
CAL
Softkey in the automount setup menu and the mount NFS device
menu. Displays a dialog box for entering the remote host name (or host
IP address) for an NFS device.
Access Keys:
SYSTEM OPTIONS
Automount Setup
This softkey also appears in the automount dev table menu and the
NFS device table menu. Displays an expanded version of the remote
file system information found in the automount device table and the
NFS device table.
Access Keys:
SYSTEM OPTIONS
NFS Device Table
or
SYSTEM OPTIONS
Automount Setup Automount Device Table
See The LAN Interface User's Guide Supplement for more information.
ET User's Guide
or , Amplifier
MEAS 2
or Mixer or Cable
Cal Check View Cal Check
LAN
or Mount NFS Device
LAN NFS Device Setup
LAN NFS Device Setup
Hardkey/Softkey Reference
for more
or Filter or
(Option 100 only)
NFS Device Setup
R
,
8-71