HP 8712ET User Manual page 341

List Trace
Values
Load
Load CC
From Disk
Load Match
Softkey in the define hardcopy menu. Defines the hardcopy as a list of
data trace values. Trace values for Cartesian format are in two
columns: frequency and amplitude. Trace values for polar format are in
three columns: frequency, magnitude, and phase. Trace values for
Smith chart format are also in three columns: frequency, resistance
and complex impedance.
NOTE
See "Printing and Plotting Measurement Results" on page 4-77
more information.
Access Keys:
HARDCOPY
Softkey in the modify kit menu. Allows you to modify the following
characteristics of the load calibration standard in your calibration kit:
delay, loss, and Z .
0
See "Calibration Kits" on page 6-16
Access Keys:
CAL
Softkey in the update correction constants menu. Loads a temporary
copy of CC data from floppy disk to the analyzer's internal volatile
RAM.
See the Service Guide for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the cal check menu. One of the corrected measurement
uncertainties that can be viewed after performing a cal check.
Refer to Chapter 6 for more information on using cal check.
Access Keys:
CAL
ET User's Guide
Plotting lists with many data points can be very
time consuming.
Define Hardcopy
for more information.
More Cal Cal Kit
Service
Cal Check View Cal Check
Hardkey/Softkey Reference
for
Modify (Cal Kit type)
Update Corr Const
L
8-49