HP 8712ET User Manual page 314

Define PCL5
Default
Pen Colors
Define Plotter
Define Printer
Default
Response
Define Save
Hardkey/Softkey Reference
D
Softkey in the HARDCOPY
PCL5 printer in terms of color, orientation, autofeed, and margins.
See "Connecting and Configuring Printers and Plotters" on page 4-67
for more information.
Softkey in the set pen numbers menu. Resets the plotter pen number
assignments to their default values.
See "Define the Printer or Plotter Settings" on page 4-72
values.
Access Keys: HARDCOPY
Softkey in the
HARDCOPY
plotter in terms of color, pen numbers, and autofeed.
See "Connecting and Configuring Printers and Plotters" on page 4-67
for more information.
Softkey in the
HARDCOPY
printer in terms of color, orientation, autofeed, resolution, and
margins.
See "Connecting and Configuring Printers and Plotters" on page 4-67
for more information.
Softkey in the
CAL
key to recall a response calibration that was performed at the factory
or during servicing. Corrects for frequency response errors.
See Chapter 6 for more information.
Softkey in the
SAVE RECALL
instrument state, measurement calibration, measurement data, or
combinations. Allows the choice of saving trace data in ASCII format
for output to spreadsheets. ASCII data is compatible with Lotus 1-2-3
and Touchstone formats.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
8-22
menu. Displays the menu to define a
Define Plotter
menu. Displays the menu to define the
menu. Displays the menu to define the
menu when measuring transmission. Use this
menu. Displays the menu to save the
for default
Set Pen Numbers
for
ET User's Guide