HP 8712ET User Manual page 75

4. Press
5. When the instrument prompts you to connect a through cable,
Figure 3-7 Through-Cable Connection
6. Remove adapter A, and place adapter B (type-N(m) to type-N(m)) on
7. When the instrument prompts you, connect three standards (open,
ET User's Guide
Prior Menu Prior Menu Enhanced Response
connect the TRANSMISSION port test cable to adapter A on the
REFLECTION port as shown in
Measure Standard
the REFLECTION port. Adapter B becomes the effective test port.
short, and load) to adapter B—as shown in
Measuring Transmission Response
Figure 3-7. Press
.
Making Measurements
.
Figure 3-8.
3-23